Fortune Artistry Industrial Grade Epoxy Resin is the toughest member of our 3:1 family. It is intended for maintenance, fabrication and coating jobs where the finish has to take load, impact and spills rather than just look good.

The cured film bonds tightly to concrete, metal, GRP and timber, making it equally useful as an adhesive, a protective coat and a repair compound.

Built For Hard Use

• High compressive and tensile strength
• Abrasion resistant film for traffic areas
• Withstands oils, fuels and common workshop chemicals
• Bonds to concrete, metal, GRP and wood
• Low shrinkage, dimensionally stable cure
• Can be filled with sand or aggregate

Application Areas

• Workshop & Garage Floors
• Machine Base Grouting
• Metal & Concrete Repair
• Protective Coating
• Structural Bonding
• Composite & GRP Work

Available Weight Variations (3:1 Ratio)

How To Use

1. Clean the substrate down to sound, dry material
2. Mix Resin and Hardener in a 3:1 ratio by weight
3. Add fillers or aggregate only after the two parts are fully blended
4. Apply by brush, roller or trowel within the working time
5. Allow a full cure before loading or putting into service

Specifications

• Brand: EA Fortune Artistry
• Mix Ratio: 3:1 by weight
• Use: Industrial Coating & Bonding
• Finish: Clear, Fillable
• Strength: High Load Bearing
• Odor: Low