Fortune Artistry Wood Stabilizing Epoxy Resin is the workshop grade of our 3:1 range. Its wetting ability lets the mix travel into open grain, splits and insect voids instead of sitting on top, stabilising fragile timber before it ever reaches the planer.

Once cured it reaches a high hardness that routs, turns and sands cleanly alongside the surrounding wood.

Workshop Advantages

• Penetrates deep into open grain and hairline splits
• Locks loose knots and stabilises punky timber
• High hardness for clean machining and turning
• Clear fill that shows off natural grain
• Accepts pigments, mica and wood dust fills
• Strong adhesion to oily and dense hardwoods

Perfect For

• Knot & Crack Filling
• Slab Void Repair
• Timber Stabilizing
• Wood Turning Blanks
• Cutting Board Repair
• Furniture Restoration

Available Weight Variations (3:1 Ratio)

How To Use

1. Dry and dust off the timber before filling
2. Mix Resin and Hardener in a 3:1 ratio by weight
3. Seal open voids from below with tape or a barrier coat
4. Fill slightly proud of the surface to allow for sanding
5. Cure fully before planing, routing or sanding

Specifications

• Brand: EA Fortune Artistry
• Mix Ratio: 3:1 by weight
• Use: Wood Stabilizing & Filling
• Finish: Clear, Sandable
• Hardness: High
• Odor: Low